Switching frequency

A 16 V-Output Switched-Capacitor Sigma Converter With 180 ns Transient Response and 94% Efficiency for LiDAR Receivers

A 16 V-Output Switched-Capacitor Sigma Converter With 180 ns Transient Response and 94% Efficiency for LiDAR Receivers 150 150

Abstract:

This article presents a step-up switched-capacitor (SC) sigma converter with fast transient, high efficiency, and high accuracy for light detection and ranging (LiDAR) receiver applications. The proposed sigma converter combines an unregulated SC converter in the high-voltage (HV) domain and a low-dropout (LDO) regulator in the low-voltage (LV) domain, achieving …

View on IEEE Xplore

A Two-Stage 12–1-V Converter Featuring Regulated Resonant SC Regulators and Collaborative Control Scheme

A Two-Stage 12–1-V Converter Featuring Regulated Resonant SC Regulators and Collaborative Control Scheme 150 150

Abstract:

In the field of power converters for data centers, the two-stage architecture has received widespread attentions due to its various advantages. Especially, the switched-capacitor voltage regulator (SCVR) becomes popular as the second-stage converter owing to its high efficiency and power density. However, the SCVR suffers from poor voltage regulation and …

View on IEEE Xplore

SLiMDO: A Single-Link Multi-Domain-Output Isolated DC–DC Converter With Passive Magnetic Flux Sharing for Local Energy Distribution and Rx Behavior Sensing-Based Global Power Modulation

SLiMDO: A Single-Link Multi-Domain-Output Isolated DC–DC Converter With Passive Magnetic Flux Sharing for Local Energy Distribution and Rx Behavior Sensing-Based Global Power Modulation 150 150

Abstract:

This article introduces a small form-factor single-link multi-domain-output (SLiMDO) isolated dc–dc converter design. The proposed design provides two regulated outputs in separate domains in the receiver (Rx) side with a single micro-transformer. These isolated Rxes achieve local voltage regulation and automatic energy distribution across domains through passive magnetic flux …

View on IEEE Xplore

A Low-EMI, High-DR Class-D Audio Amplifier With Double-Sided Voltage-Boosting Modulation

A Low-EMI, High-DR Class-D Audio Amplifier With Double-Sided Voltage-Boosting Modulation 150 150

Abstract:

This article presents a digital-input class-D audio amplifier (CDA) that employs a double-sided voltage-boosting (DSVB) modulation scheme, integrating a capacitively coupled chopper amplifier (CCCA) with a single-inductor buck–boost power stage. The CCCA achieves a high dynamic range (DR) due to its very low noise floor and is implemented with …

View on IEEE Xplore