low jitter

BASS-PLL: A Bandwidth Augmented Sub-Sampling PLL Achieving a Wide Bandwidth Above 30% of the Reference Frequency and a Worst Case FoMREF of −247.9 dB at 3 GHz With a Ring Oscillator

BASS-PLL: A Bandwidth Augmented Sub-Sampling PLL Achieving a Wide Bandwidth Above 30% of the Reference Frequency and a Worst Case FoMREF of −247.9 dB at 3 GHz With a Ring Oscillator 150 150

Abstract:

This work presents a bandwidth augmented sub-sampling phase-locked loop (BASS-PLL) architecture that features simultaneous out-of-band noise suppression by direct and multipath sampling of the ring oscillator’s (ROs) output and in-band noise suppression via an intrinsic sub-sampling mechanism, ultimately combining the benefits of over-sampling PLLs (OS-PLLs) and sub-sampling PLLs (SS-PLLs) …

View on IEEE Xplore

A −248-dB FOMref CS-Fusion PLL Architecture Combining the Advantages of PFD-CP PLLs and Sampling PLLs in a Single Loop

A −248-dB FOMref CS-Fusion PLL Architecture Combining the Advantages of PFD-CP PLLs and Sampling PLLs in a Single Loop 150 150

Abstract:

This article introduces a CP-sampling (CS)-fusion PLL architecture that combines the advantages of PFD-CP PLLs (robust and speedy locking) and sampling PLLs (low jitter/power) in a single loop. The PFD sends pulsewidth-modulation (PWM) pulses to a merged $mathbf {G_{m}}$ /CP (GCP) block so that the phase error …

View on IEEE Xplore

A 24.5–45.2-GHz Low-Jitter Compact Differentially Injection-Locked Clock Multiplier With Folded-Inductor-Based Magnetic-Flux Cancellation

A 24.5–45.2-GHz Low-Jitter Compact Differentially Injection-Locked Clock Multiplier With Folded-Inductor-Based Magnetic-Flux Cancellation 150 150

Abstract:

In this article, we present a differentially injection-locked clock multiplier (ILCM) featuring an ultra-wide frequency tuning range (TR) and low jitter, achieved through a compact folded-inductor-based magnetic-flux cancellation technique. A co-designed series-LC dual-mode quadrature ring oscillator (QRO) and edge-combining frequency doubler operating in the mm-wave band jointly extend the TR …

View on IEEE Xplore

An Ultra-Low-Jitter Sampling-Filter-Based Charge-Pump PLL With Resistive-Discharge Time-Amplifying Phase-Frequency Detector and Series-Resonance VCO

An Ultra-Low-Jitter Sampling-Filter-Based Charge-Pump PLL With Resistive-Discharge Time-Amplifying Phase-Frequency Detector and Series-Resonance VCO 150 150

Abstract:

This article presents a 13-GHz quadrature charge-pump phase-locked loop (CPPLL) that simultaneously achieves ultra-low jitter and low-spur performance. First, a low-noise resistive-discharge time-amplifying phase-frequency detector (RD-TAPFD) is proposed, achieving extremely low inherent noise and significantly suppressing noise from the following stages. Second, a sampling-based dual-path loop filter effectively suppresses reference …

View on IEEE Xplore

A 6.8–14-GHz Ring-Based Sampling-PLL Achieving 69.3-fs Jitter Under 50-mV Supply Noise

A 6.8–14-GHz Ring-Based Sampling-PLL Achieving 69.3-fs Jitter Under 50-mV Supply Noise 150 150

Abstract:

This article presents a type-III wide-bandwidth ring-oscillator-based analog phase-locked loop (PLL) optimized for low-jitter performance in noisy supply environments. The design uses an 812.5-MHz reference frequency and a high-gain sampling phase detector to achieve a closed-loop bandwidth over 100 MHz, effectively reducing the intrinsic phase noise of the ring oscillator. To …

View on IEEE Xplore

A Low Jitter and Low Spur Fractional-N Digital PLL Based on a DTC Chopping Technique

A Low Jitter and Low Spur Fractional-N Digital PLL Based on a DTC Chopping Technique 150 150

Abstract:

This work presents a digital-to-time converter (DTC)-based fractional-N digital phase-locked loop (PLL) designed to achieve simultaneously low jitter and low spurs. We introduce a novel DTC chopping technique that effectively mitigates fractional spurs, which we identify as predominantly arising from even-order nonlinearity invariable-slope (VS) DTCs. The proposed technique suppresses …

View on IEEE Xplore

A 60-GHz Low-Noise mmWave Divider-Less Fractional-N Cascaded PLL Achieving −250.2-dB FoMJ in 28-nm CMOS

A 60-GHz Low-Noise mmWave Divider-Less Fractional-N Cascaded PLL Achieving −250.2-dB FoMJ in 28-nm CMOS 150 150

Abstract:

This article presents a fractional- ${ {N}}$ cascaded phase-locked loop (PLL) operating in the mmWave band from 55.8 to 64.2 GHz. The cascaded architecture consists of a first-stage fractional- ${ {N}}$ reference-sampling (RS) PLL and a second-stage sub-sampling (SS) PLL, incorporating two key innovations. The first-stage RS-PLL leverages a fully differential voltage-domain quantization-noise cancellation (…

View on IEEE Xplore

A 94-fs Jitter and −249.3-dB FoM MDLL With Background Calibration of Injection Phase and Slew-Rate Mismatch

A 94-fs Jitter and −249.3-dB FoM MDLL With Background Calibration of Injection Phase and Slew-Rate Mismatch 150 150

Abstract:

This article presents a ring oscillator (RO)-based multiplying delay-locked loop (MDLL) that incorporates a dual-background calibration scheme to compensate for both injection phase and slew-rate mismatches. The MDLL employs the proposed frequency/slew-rate detector (FSD) to distinguish both mismatch types by comparing the pulse widths of consecutive output clock …

View on IEEE Xplore

A 9-GHz Low-In-Band Noise Sub-Sampling-Chopper PLL With Charge-Share Canceling Technique

A 9-GHz Low-In-Band Noise Sub-Sampling-Chopper PLL With Charge-Share Canceling Technique 150 150

Abstract:

This article presents a low-jitter sub-sampling chopper phase-locked loop (SS-CPLL) that incorporates a novel chopping charge pump (C-CP) to mitigate 1/f noise in short-channel devices operating at a low supply voltage of 0.75 V. A charge-share cancellation technique is introduced to suppress ripple generated by residual charge from the previous reference …

View on IEEE Xplore