Circuits and systems

A Reconfigurable Multimode Readout IC for Nonconductive and Capacitive Sensing With 33.9-dB SNR on 6.5-in AMOLED Panels

A Reconfigurable Multimode Readout IC for Nonconductive and Capacitive Sensing With 33.9-dB SNR on 6.5-in AMOLED Panels 150 150

Abstract:

This letter presents a multimode readout IC for 6.5-in 34Tx/16Rx on-cell touch AMOLED (OCTA) panels, detecting both conductive and nonconductive objects (NCos) without panel modifications. To enable this dual detection, a reconfigurable analog front-end (AFE) is proposed, functioning as either a capacitance-to-voltage converter or a triboelectric charge sampler. In …

View on IEEE Xplore

A Novel VGSOT-pMTJ Write Circuit for Hybrid CMOS/MTJ CIM Architecture

A Novel VGSOT-pMTJ Write Circuit for Hybrid CMOS/MTJ CIM Architecture 150 150

Abstract:

Hybrid computation-in-memory (CIM) architecture has emerged as the most promising alternative to overcome the drawbacks of the conventional CMOS-only devices used in the conventional von-Neumann architecture. In the hybrid CIM architecture, a pair of perpendicular magnetic tunnel junctions (pMTJs) is used to store one bit of information. Though there are …

View on IEEE Xplore

A High-Efficiency Magnetoelectric Power Link With a Load-Adaptive CMOS Rectifier for Miniaturized Implants

A High-Efficiency Magnetoelectric Power Link With a Load-Adaptive CMOS Rectifier for Miniaturized Implants 150 150

Abstract:

Miniaturized biomedical implants are currently constrained by limited wireless power transfer (WPT) efficiency under load variation and spatial misalignment. This work presents a custom magnetoelectric (ME) power link incorporating a load-adaptive CMOS rectifier to address these challenges. By employing a current sensing control loop for dynamic switch sizing and delay …

View on IEEE Xplore