IEEE Journal of Solid-State Circuits – Early Access

A 40.68-MHz Dual-Output Wireless Power Transfer System for Millimeter-Scale Biomedical Implants

A 40.68-MHz Dual-Output Wireless Power Transfer System for Millimeter-Scale Biomedical Implants 150 150

Abstract:

This article presents a single-link, dual-output wireless power transfer (WPT) system operating at 40.68 MHz for miniature, high-power biomedical implants. The elevated carrier frequency enables a millimeter-scale receiver (RX) coil while maintaining link efficiency and output power comparable to low-frequency WPT designs. End-to-end (E2E) efficiency is optimized through global power …

View on IEEE Xplore

A 112-Gb/s Discrete Multitone Wireline Receiver Datapath With Time-Interleaved Time-Based ADC in 5-nm FinFET

A 112-Gb/s Discrete Multitone Wireline Receiver Datapath With Time-Interleaved Time-Based ADC in 5-nm FinFET 150 150

Abstract:

This article presents a 112-Gb/s discrete multitone (DMT) wireline receiver (RX) datapath with a 50-GS/s, 8-bit, 64-way ( $8 \times 8$ ) time-interleaved time-based analog-to-digital converter (TI-TBADC) in a 5-nm FinFET. The TBADC converts the voltage input into a time-domain quantity using a ring oscillator (ROSC). Eight-slice TBADCs, driven from the same …

View on IEEE Xplore

A Machine Learning-Inspired PAM-4 Transceiver for Medium-Reach Wireline Links

A Machine Learning-Inspired PAM-4 Transceiver for Medium-Reach Wireline Links 150 150

Abstract:

This article presents an energy-efficient machine learning-inspired PAM-4 wireline transceiver that leverages data encoding at the transmitter (Tx) and feature extraction with classification at the receiver (Rx) to compensate for channel loss ranging from 13 to 26 dB, while maintaining the bit error rate (BER)<10-11. A new consecutive symbol-to-center (CSC) encoding …

View on IEEE Xplore

An Area and Power Efficient Source Driver IC With Multi-Line Sensing Real-Time Pixel Compensation for OLED Displays

An Area and Power Efficient Source Driver IC With Multi-Line Sensing Real-Time Pixel Compensation for OLED Displays 150 150

Abstract:

This article proposes a source driver integrated circuit (SD-IC) with a pixel compensator designed to minimize both silicon area and power consumption for organic light-emitting diode (OLED) displays. The proposed SD-IC is capable of driving ultrahigh-definition (UHD) active-matrix OLED (AMOLED) panels with a one-horizontal-time (1-H time) of $7.2~\mu $ s while …

View on IEEE Xplore

A 28-Gb/mm2 4XX-Layer 1-Tb 3-b/Cell WF-Bonding 3D-nand Flash With 5.6-Gb/s/Pin IOs

A 28-Gb/mm2 4XX-Layer 1-Tb 3-b/Cell WF-Bonding 3D-nand Flash With 5.6-Gb/s/Pin IOs 150 150

Abstract:

The challenge of evolving to create a memory that is shrinking compared to the previous generation while satisfying the high performance and low power required for flash memory has been present in every generation, but the recent rapid change to artificial intelligence (AI) trends is very tough, as the level …

View on IEEE Xplore

IRIS: An Energy-Efficient Spatial Computing SoC for Real-Time Interactive Rendering and Modeling With Surface-Aware 3-D Gaussian Splatting

IRIS: An Energy-Efficient Spatial Computing SoC for Real-Time Interactive Rendering and Modeling With Surface-Aware 3-D Gaussian Splatting 150 150

Abstract:

The 3-D Gaussian splatting (3DGS), based on a machine learning-driven radiance field technique, is rapidly emerging as a next-generation solution in 3-D graphics. Owing to its short modeling time, computational simplicity, and high rendering quality, it is expected to replace traditional 3-D graphics on edge devices. However, its substantial memory …

View on IEEE Xplore

A 4.6 μW, 133-VPP Common-Mode Interference-Tolerant Biopotential Amplifier for Two-Electrode Recording System in 110-nm CMOS

A 4.6 μW, 133-VPP Common-Mode Interference-Tolerant Biopotential Amplifier for Two-Electrode Recording System in 110-nm CMOS 150 150

Abstract:

This article presents a biopotential recording analog front-end (AFE) specifically tailored for a two-electrode measurement system, capable of capturing small biopotential signals while tolerating a large common-mode interference (CMI) over 130 VPP. By leveraging the Miller effect, the proposed CMI-Follower provides a significantly low common-mode input impedance ( $Z_{\text {IN-CM-C}}$ ), achieving …

View on IEEE Xplore

A 1-8 GHz, 190MHz BB BW Mixer-First Receiver With Bootstrapped Mixer Switches Achieving Over 16dBm In-Band IIP3

A 1-8 GHz, 190MHz BB BW Mixer-First Receiver With Bootstrapped Mixer Switches Achieving Over 16dBm In-Band IIP3 150 150

Abstract:

In this article, we propose a wideband mixer-first receiver with improved in-band (IB) linearity. It uses bootstrapped N-path mixer switches to achieve a constant on-state gate–source voltage for large IB signals. We analyze the tradeoff between on-state resistance and off-state subthreshold current in conventional mixer switches and introduce a …

View on IEEE Xplore

A 28-nm 8–28-GHz Eight-Phase Clock Generator Using an Injection-Locked Dual-Feedback Ring Oscillator

A 28-nm 8–28-GHz Eight-Phase Clock Generator Using an Injection-Locked Dual-Feedback Ring Oscillator 150 150

Abstract:

The injection-locked ring oscillator is being widely used in high-speed wireline transceivers to generate multi-phase clocks. The fundamental limit lies in the tradeoff between the number of output phases and the maximum operation frequency for a given technology node. This work proposes the dual-feedback ring oscillator that breaks the tradeoff …

View on IEEE Xplore